Questions & Answers for: Trilogy master lock

master code, if you are only using 1 code to open the lock this should suffice. Remove power pack and press and hold 5 for 10 seconds replace battery pack and with in 5 seconds enter master code 12345

...lock, I can get the master code to react and open the door, however I can't get it to go to an access code. I put in the master code then al 11 al managers code of 393 and nothing happens. what am I ...

...takes the code and green light comes on but the lock does not relock. The lock is probably in passage mode, enter master code then press A5A this should bring the lock back to normal operating

...Lock 3000. I understand the master code in the locks must be the same as on the computer in order for data to be transferred from the computer to each lock.. This is the website for Alarm Lock, the ...

...lock. I need to change the Master Code but it does not work by the process given in the Programming sheet.It does not accept the new code. This is the website for Alarm Lock, the ...

master and enter a user access code. Cannot do either Trinity Keyless Biometric lock: I can't answer your question directly, but I can steer you to their website, which includes a support phone number

...my master code.. what can I do to get the lock to engage? This is the website for Alarm Lock, the manufacturer:http://www.alarmlock.comI urge you to contact them directly for technical

...master code when programmed but will not accept any other codes(Manager or User). Is there something else that can be done to get this lock to accept manager and user codes? I use several of these ...

...lock. I use only the master code. It accepts the code like it is working but you can't open the door.It stopped working and then started working again and now it quit again. Is there something ...

reprogram master code on the keypad press the following... (old master code) wait for green light press and hold AL key until multiple beeps are heard. this puts you into program mode. TO ENTER NEW ...