Question about Harley-Davidson Motorcycle Desktop Telephone
...point cam lobe (the small one) is coming around and getting ready to open the points. Remove the timing plug on the engine and gently turn the engine on the kickstarter until the timing mark appears ...
...cam, the index mark or marks are in the proper position. The proper position depends on what markings are on the cam. Some bikes have a single mark; an arrow, a straight line or an "O". The mark ...
were do the timing marks on the cams point in or were do the timing marks on the cams point in or out.gpz500s 1993. the camshaft marks should point out.
...mark is at the very top of the engine (in line with the cylinder, if the cylinder is slanted). At this point, neither the intake nor the exhaust valves should be open. Now connect the cam chain while ...
...cam shafts and the timing of the cams is set at the factory and is not affected by the points. Just set the points at .015 gap when fully opened then get a timing light and rotate the points base ...
Question about 1987 FZ 750 MG (Europe-US)
...cam mark normally points to the rear of the engine with the mark level with the rocker cover base,then you reinstall the cam chain and sprockets,keeping the front of the camchain tight (the rear of ...
...mark on the engine casing. You will want the cams positioned so that the heels of the lobes are down toward the cam followers. The lobes themselves will kind of point up and away from the cylinder ...
...plate left/right until timing marks align. Hook timing light to #2 cylinder. Run @ 2500 RPM. Adjust remaining point sub-plate (on main point plate) until sceond timing mark aligns by timing
...MARK LINED UP WITH NOTCH IN INSPECTION HOLE, CAM SPROCKET DOT POINTED TO TOP OF CAM COVER, YOU MAY HAVE TO MAKE ONE MORE ROTATION TO GET ALL MARKS TO LINE UP AT THE SAME TIME. IF YOU HAVE REMOVED THE ...
Question about 1973 T 100 R
...mark pointing down or do they both point upward On the 4 cyl engine, you line up the crank pulley with the timing mark and the cam gear with the pointer on the timing cover. On V6 engines the cam and ...
Usually answered in minutes!
3,453 Questions
1,326 Questions
1,157 Questions
1,197 Questions
607 Questions