Questions & Answers for: Pontiac Grand Am manual transmission

Question about 1995 Grand Am

1 Answer

...manual transmission is difficult to do for several reasons. the pedals are one, and most american engines are built for a specfic transmissions, are two. Engines built for auto trans, the crankshaft ...

Ad

How to shift the transmission from park to neutral manually. I have a 1990 grand am with the transmission in park the shift leaver will move but the transmission will not shift out of park.Can I ...

Ad

Manual Transmission won't drive in reverse. 2001 Pontiac Grand Am was fine getting out of parking lot this morning and then suddenly wouldn't drive in reverse. It's a manual transmission so it will ...

manual transmission or an automatic? If it is an automatic transmission, the stick, much like the oil dipstick, is near the backside of the motor under the hood. Make sure you check the level with the

...Manual Transmission, ..........1.7 liters 2001 PONTIAC GRAND AM 2.4L 4-cyl Engine Code [T] CAPACITIES: Engine, without filter..........3.8 liters Cooling System, Initial Fill..........10.5 liters ...

...dipstick is very long as well, and transmission fluid is red. There is no dip stick to check the transmission fluid, manual tells you to take it to a service shop. I have the same car as

Question about 2004 Grand Am

1 Answer

...manual transmission, in which case, the clutch is likely worn? Or is it an automatic transmission, where the torque converter or clutches inside the transmission may be worn? If it's an automatic ...

Question about 2004 Grand Am

2 Answers

...type of oil to use. Dexron III if its an automatic Syncromax Standard Transmission fluid if its a ...

...Transmission Fluid Pressure (TFP) manual valve position switch consists of five pressure switches (two normally-closed and three normally-open), and a transmission Fluid Temperature (TFT) sensor ...

My2003 pontiac grandam wont shift out of low range even if i try to do it manually. It is the small four cylinde?r engine The transmission is in 'limp mode'. The electronic controls intentionally will

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...