manual feed slot. 7. Turn the printer off. 8. Take a #10 envelope and feed it through the left side of the manual feed slot until it comes right through the printer to the back of the exit rollers. 9.
Question about 922 All-In-One InkJet Printer
printer paper feed When I try to print, it will not grab the paper. Instead it says there is no paper in the tray. Sometimes, if I take a single sheet and feed it manually as it is trying to print, it
...feed takes several sheets LaserJet 1100A Scanner/Copier unit grabs more than one page.. It used to be fine but now I have to manually feed one page at a time. Any suggestions please? compatible DVD ...
...to Manual Paper Feed and click OK, then go ahead and print. The printer is pretty finicky. Sometimes the paper won't grab and pull through so I have to turn it off and on again and start over
paper won't feed through my Lexmark Z52 printer properly. The roller doesn't seem to grab the paper unless I move the paper down manually. try to replace feed roller might that roller already worn out
Printer feed will just not grab paper Have tried cleaning the paper feed roller using the instructions from Canon, but cannot go to step 6 since will not grab paper. And, have tried a q-tip to clean ...
Question about Color JetPrinter Z52 InkJet
...manual feed, then shows Paper Jam and stops feeding paper any further. I've used canned air, turned rollers on bottom inside-out and shaken printer while upside down (it, not me!). Any other ...
...grabs, it will only feed a short distance as it catches on the teeth inside the machine and won't go any further. I don't think I can load it via the tray as it's 350gsm and won't take the bend ...
Manual feed won't grab paper HP LaserJet 9050dn. When printing to Tray 1 (manual feed), often the first few pieces will be grabbed by the rollers but a random subsequent piece will not, which gets ...
Question about imageCLASS MF4890dw Wireless Multifunction Laser Printer, Copy/Fax/Pri
...manual feed. Now, it won't grab the labels and even has problems, at times, with normal paper. Does it sound like I need to replace the D-shaped Pickup roller? Labels are a tough feed for any printer ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions
