...makes a terrible noise. Please Help, Susan Try to turn the handwheel by hand, with the machine switched "off". If no success, then remove the bobin case from the shuttle hook, and try to turn the ...
...sewing machine how to thread the bobbin Drop-in bobbin: Note: thread must change direction when entering bobbin shuttle notch. Usually bobbin will turn counter-clockwise when threaded properly. 1. ...
...machine the thread bunches up under the fabric and turns into a huge knot. make sure the bobbin thread is wound and installed correctly remove tangled thread and clean lint out from under feed plate ...
Question about LS-2125 Mechanical Sewing Machine
...and surrounding area, look for thread snips that may be entwined in the movement of the shuttle and remove. If the problem continues, you will have to resort to taking the machine in for
...makes clickity- clack noise. The bobbin case is not in the shuttle. Raise the needle to it's highest position. Lift the lever on the back of the bobbin case and hold it open as you insert the case ...
...sewing. Open the shuttle race and remove the bobbinand bobbin case. 2. Turn the hand wheel toward you until the needle hasreached the lowest point of the stroke. The hook should be at the top of ...
Question about 15212 Mechanical Sewing Machine
...shuttle, breaks needle and keeps me from sewing. i've tried to figure it out, but without any luck. any suggestions? As I am turning hand knob counterclockwise and / or using pedal, needle is hitting ...
Question about 7468 Mechanical Sewing Machine
...sewing machine to a repair shop to see if thereis something wrong with the hook & hook race,,that may be whythe bobbin case is coming out. HI I HAVE THAT MACHINE THE LITTLE BLACK ...
Question about Disney PE-180D Computerized Sewing Machine
shuttle rather than sewing then the machine stops after the top thread breaks , I've tried the tension on different settings also ? It sounds like the lower shuttle is out of place. You should be able
Question about Disney PE-180D Computerized Sewing Machine
...sewing machine http://download.brother.com/welcome/doch000256/l30ls17172020ug03enfrpoes.pdf Lower bobbin threading Brother Turn the power switch to "o". Raise the needle to its highest position by ...
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions