Questions & Answers for: mains for pan Music

Problem with main output no sound right XLR. Xenyx 4224FX Check that PAN controls are centered.

Trying to connect a PMP300 to 2 passive speakers. Output A&B are connected, input via RCA on chan 9/10. Sound only coming out of L speaker. Level seems ok and clip level showing L&R feeds. ...

Computer->M-Audio-FastTrackPro USB->trs outputs 1/2->linein 11-12 of mackie 1202-vlz3. How can i get stereo sound out of the mackie? Use TRS to TRS balanced cables from the M Audio to the ...

Hi I have a mackie sr series 24.4.2.b bus miximg console in for repair,most of it is working except that the right channel output is misssing on on sub outputs 1 and 5 and 3 and 7,i do not think its ...

When I plug in my XLR microphone to my Behringer PMP3000 it only works on the Main/Mon function not the Main L/R function, and when it is working it only amplifies through one speaker. WHY??? Check if

how can i setup mu xenyx 802 with my pc? i also hve fca202... You can do it one of two ways when coupled with the FCA202. First, You can just come out of the main outs on the 802 via 1/4 in to the ...

I have an XR8600 - I am using it without Monitors. The Main/Monitor Send is sending a stonger signal to one speaker than the Main/Main send is to the other. have checked leads and speakers and know it

poca sensibilidad en los microfonos, el canal MAIN R no tiene audio Set PAN knobs at 12 O'clock.

soundcraft efx 12 Newbie here I have a soundcraft efx 12 and I use 2 Yorkville nx 55 powered speakers for the Front of house and 2 Yorkville nx 55 for monitors ,but I don't have control for each ...

How to connect s1100 akai sampler to a mixing board music amplier how to connect the jack plug into the right connections Nothing You would come out of the S1100 l/r output jacks into your mixer line ...