Questions & Answers for: main beam on all the time

...main headlight beams seem to be. They are fantastic when on high beam but in dark lanes I get poor visibility. Has anyone else noticed this? add some driving lights or re aim your high beams lower so ...

...main beam were on in foggy situations.in other words pointless having them switched on.you could always fit accesory spots/driving lights.(like rally cars)but these MUST only come on with high ...

main beam on only sidelights or full beam.i have a 54 plate vw polo renew the stalk control ,the switch is on the dash i know on this car but the dip/beam control is on the steering column and this is

...ARE not set right, i ask my ford dealer to adjust then but the come back the same every time. The right high beam shines +/_ 20m ahead and is dark beyond that is this the dip beam or the main beam

...main fuse box located under the hood near the battery. Check the high beam relay ? it mybe stuck??Here is a picture of the location, its #8 ... Must be a relay or it's fuse. There's a recall for this ...

...will work at a time or only one high beam will work at a time, i replaced both bulbs and still the same. there is a fuse under the hood in the main fuse box there are two fuse for each head

...beam is a bulb on its own,usually under the big main bulb.the main big bulb works your normal night time driving and your high beam,ie.flashers.if 1 low beam has blown its more than likley a power ...

...main beam and brake lights? bike is a 1999 model Did you check if one of the bulb elements are burned out? The single head light has two elements (high beam and low beam). Usually, you ride with the ...

low beams will work again. Doesn't matter if headlight switch Full time 4wd, 6 cyl. Try the relays for the high / low beams. It should be in the main fuse box. Next is a problem with the column switch

...main beams, or both high beam filaments in bulb gone at once (I had this both at one time) If you disconnect the switch, then working from bulb, feed 12volts, via fuse, to the bulb terminal, one will ...