Questions & Answers for: magnavox tv standby light

tv goes back to stand by. don't have magnavox remote any ideas? i was programming my television by hand because i do not have a remote to my television and i accidentally set the child lock and now my

...a local tv repair man to use a magnavox remote control and simultaneously press tv/av and enter.if u take ur tv to him he'll probably do it for free. u can order a remote for $50 if u call the 800

standby led light stays on imediately after plug in. No other response. philips 50inch stays in standby wen pluged in

...my tv not come on but power light just my tv does not come on but power light just blinks on and off tv will not come on sound will for a little bit and then quit but the standby light blinks 10 ...

...TV in standby. TV stuck in stanby. No Picture. Used to be able to hit power button again and it would switch between the two. Unplug,replug the tv an hour later,let the tv reset itself,might work ...

MAGNAVOX 37MD359B /F7 TV turns on for maybe 30 seconds, then green light goes out and red standby light is on. No picture or sound. Are there caps on this board I can change to correct? magnavox ...

...magnavox LCD tv 19me402v/f7 has no power at all,I try to turn it on and nothing happens, what could be the problem? Another thing I will like to know is any other way to turn it on without using the ...

...magnavox tv model num 50mf231d137 will not turn on it turns on then turns off with red light blinking green light comes on then a click sounds then the red light comes on flashing How many times this ...

standby/power light blinks at one time switch ON? Count it carefully. These blinks are fault indication, and known as blinking codes. From the number of blinks occur at one time switch ON; you can get

...MAGNAVOX 32MF301B. IN ONE, YOU WILL SNIP ONE END OF DIODE, LOCATION IS D620. SNIP ONE END AND LIFT IT HIGH ENOUGH TO CLEAR THE BOARD. YOU DO NOT WANT TO DESTROY THE BOARD. IF YOU CANNOT FIND D620, IT ...