Questions & Answers for: magic chef stove oven temp

Magic chef stove Magig chef stove Control panel does not light up cannot tell what oven temp is If the oven is working but the control does not light up then you will have to replace the control. If ...

to that temp. I checked the breakers and they are fine. Not sure what I need to do. It is a wall unit ( Magic Chef) about 20 years old. sounds like you have a bad wire connection someplace in the oven

Magic Chef oven won't heat up past 200 degrees Model CER3725AAW won't heat up past 200 degrees and it takes about an hour to get it to that point! You obviously have one or more elements not working, ...

Magic Chef oven & broiler do not work I have a problem with a Magic Chef stove. Model number 34JN3TKXW. The top burners work. The clock and timer work. The oven, broiler and self-cleaning do not ...

magic chef oven/stove top range not staying hot My magic chef oven/stove is 10yrs old... the problem is you turn the oven on an it get to the temp like 350 then it goes back down to like 200. we just ...

Magic Chef gas oven thermostat is not working properly. At 400 degrees it only heats to 200 degrees and at 500 degrees it only heats to 300 degrees. Do I need to replace it or can I calibrate it? ther

...magic chef black electric stove and i never used the self cleaning but i cant stop the process the door is locked and the stove is getting very hot Hello there: Magic chef ovens and various other ...

...magic chef oven at 400 degrees,and it shuts off before it reaches the temp. Have you checked the internal temp with an oven thermometer? The thermostat might need calibrating or replacing, or, (if ...

Magic Chef 59F-5TXW oven. After replacing a burnt out lower heating element the display shows 325? when the oven temp measures 250? here you go... has to be item 3. hope this helps and you have a good

Magic Chef oven that won't get to temperature? Magic Chef propane, no electricity. Burners work pilot is lit in oven, flames when you turn on the temperature control knob but won't go past 200 degrees