Question about bizhub C250 All-In-One Laser Printer
..."C5102: Main Motor?s failure to turn": http://www.copytechnet.com/forums/konica-minolta/15515-c252-m1-operation-test.html In addition, here?s the link to ?Bizhub C250P? related support downloads: ...
error message M1 I got a error message on my bizhub stating M1, what do you think I should do? Press Utility / Counter -> {STOP}{0}{0}{STOP}{0}{1}, now you should be in Service Mode. Go to Service ...
maintenance call(m1) konica minolta 211 sintam se cumprimentados, estou com um problema na minha bizhub 211 ela pede para contactar tecnico (M1).como faco
...c-5102 bizhub 164 error code c-5102 Code C5102 Description Main motor malfunction - The main motor (M1) lock signal remains HIGH for a continuous 1-sec. a period at any time 1 sec. after the main ...
location fuse cooling fan m1 c352 M 1 is main motor not a fan. Do you mean M 11 which fuser cooling fan located above the fuser right side of the copier above the fuser the hot part
...a predetermined continuous period of time while the motor remains stationary. Remedy 1 Check the M1 connector for proper connection and correct as necessary. 2 Check M1 for proper drive coupling ...
...not turned OFF (unblock) the bypass lift-up position sensor (PS26) even after the transport motor (M1) rotates for a given period of time after the position is switched from stand by position at
Question about bizhub C250 All-In-One Laser Printer
...the paper exit sensor (PS3) since the paper feeding is started. Causes • Transport motor (M1) • Fusing motor (M3) • Registration clutch (CL4) • Registration sensor (PS1) • Paper exit sensor
Question about Bizhub c203 Copier
Hi, after error code C5102 on Minolta C203 I checked the service manual and it seems M1 motor failed. I removed the M1 motor. Now, can I check if the problem it's 100% the motor or the electric boar ...
... There is no 'ee102'. Call for Service. C5102 Description: Main motor malfunction • The main motor (M1) lock signal remains HIGH for a continuous 1-sec. period at any time 1 sec. after the main motor ...
Usually answered in minutes!
1,023 Questions
924 Questions
417 Questions
321 Questions
302 Questions