Question about 19233 Computerized Sewing Machine
...lower the feed dog.Instructions for lowering and raising the feed dog are on page 48 of your owner's manual. Good luck! i can't find the feed dog cover for the kenmore 158.13500 so how can i free ...
...feed dogs and working it up and down until it is free again. You can take off the lower plate and clean any lint that may have collected underneath. Then make sure the thread is coming out of the ...
lower your feed dogs. I have this sewing machine and I love it. there is no way to drop the feed dogs on this machine. you should have received a feed dog cover plate in your accessory pack. you
...feed dog doesn't lower enough to go below surface of the needleplate even though it does rise and descend appropriately. The stitch length controller works okay to control fore and aft movement. What ...
...feed dogs I just got my Kenmore 19001 back from a yearly maintenance check and the feed dogs are lowered. How do I raise them? I would check back with the repair shop, they are the one's that turned ...
feed dogs cannot be lowered on my Kenmore Sewing Machine Model #158.18032 You probably have a bind in the feed dog mechanism. If you can remove the covers and manually force them down you will see the
...lower the feed dogs so that I can machine quilt... On many machines you tilt the machine back on its hinges to see the underside and there you will find a thumbscrew to lower the feed dogs...you also ...
...lower the feed dogs, but it has to spring back on its own after you move the lever back. If you can remove the lower free arm cover you may be able to work it loose. Do not use 3 in 1 oil as it is ...
Question about Memory Craft 5700
feed dogs stay down until you begin to stitch when they will rise... or you should take it for service. The answer coolandcrazy gave fixed my feed dog problem on a Kenmore model 385.16231300 Thank you
Question about Memory Craft 5700
Feed dogs do not appear to drop below the needleplate at any point during the cycle. Stitch length is set to 6. This model DOESN'T have an accessible feed dog height adjustment. To adjust the feed dog
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions