Questions & Answers for: Samsung lower door hinge

...lower edge of the freezer door hinge line, may have come loosened by opening and closing the door. That tube provides the water source for the in-door chilled water outlet. Just tighten the ...

...vicinity of the bars on the door. I have seen this to be the problem on a number of service calls. It could possibly be in the lower door hinge too. A bad or loose cam can cause the door not to

...lower hinge of that door for a broken closer cam. The upper hinge is adjustable and adjusting the corners in the front will shift the cabinet to align the door also. Eric The lower hinge on each door ...

...at the top and bottom. You may be able to see an outline of where the hinge was and needs to be. Raise / Lower Door by hand until hinge is back in place, and tighten with a screwdriver. Pretty

plus shipping and tax. To remove you would need to take the top hinge bracket off to remove the top door then the middle hinge can be remove to allow you to replace the lower door. Hope this helps you

door is 1/8 too high and resting on hinge bushing so it can't go any lower Sometimes, the entire mount can be lowered to eliminate the offset. If not, you can raise the other door to match. As

...slightly and makes a clunk sound when closing. Sometimes requires an extra push to completely close the door. The unit has been in service for 6 months. replace the lower plastic shim on the ...

...lower left hinge be moved sslightly to the right to make the left door plumb on a Samsung rf4287ha refrigerator? Tried adjusting the top hinge with the bolts loose and shimed to make the door plumb ...

...door up off the lower hinge pin. If it's the freezer door, do the same but take off the lower toe guard grille to expose the water tube going to the water dispenser. Separate the hose at the in line ...

the door normally lowers gently, it now drops quickly if it is not held back. Is there a broken spring or some other means of holding the door? Yes there is a spring that assists the door on the hinge