...low. After cranking up the MEDIA SENSOR value to 100 and the MEDIA LED to 100 the printer worked perfectly. You will probably have to roll the values back some what but now I can turn this problem on ...
no mark its just plain old paper and wont work. you will need thermal direct paper. also in printing defaults in the driver the darkness may be too low and need to be raised, but check the paper first
...low speed but in high speed it doesn't print almost anything. Already set the darkness of the printer to the maximum and still the same result. How can I use high speed and have a good printign ...
...low on the sticker although cutoff is in correct position, You need to run the calibration procedure: https://support.zebra.com/cpws/docs/z4mplus/z4mplus_man_cal.pdf ajust the darkness to +22 and ...
Question about Z4Mplus Label Printer
...low, please reset printer to factory default without any lpt/com/usb/network cables connected, turn off and on. try to run Pause test ( turn on printer with pause button pressed for 5 sec and release ...
Question about Technologies 105SL 300dpi 4" Ethernet Wireless Printer
...low in paper or ink, the cover is open, or the printer is not connected properly, etc. above some applicable solutions to fix this error. If the problem remains, check this blog or call Printer Error ...
Usually answered in minutes!
402 Questions
235 Questions
259 Questions
211 Questions
195 Questions