Questions & Answers for: Ford Explorer low

low range 4x4 when i push the button for my 4 low nothing seems to happen, no light comes on, front wheel wont turn. but my 4 high works fine. 4x4 low function will only engage when vehicle is stopped

l head light low beem not working need diagram of fuse box for a 2003 ford explorer sport and help to find the problem with the low beem on the left side, i have high beems on bothe sides and low beem

Low beams do not work, replaced turn signal switch but still no low beams. High beams work but no low. Please Help its probally the bulb........alot of car headlights are DUAL element meaning one bulb

Put car into low 4 wheel drive, then switched it back to auto...but the light on dash still says low 4wd. How bad a problem and can we continue to drive it local ...feels like in low 4wd? To get into ...

low beam headlamps wont turn on change bulbs and checked fuses and still wont come on. did you check for a relay in your fuse panel? there should be a relay that controls your low beams and one for ...

...dirves fine. This is purely a guess, but it seems to point towards the four wheel drive High and Low range, (Transmission) I had this problem recently. I do not think that I followed the 4wd/low ...

Where is the low pressure AC port in my '98 Ford Explorer? LOW pressure port should be next to dryer,,pass. side the low pressure service port is located on the compressor.

right front headlight not working on low beam right front headlight quit working on low beam only changed bulb but no help. Have you checked the relays and fuses,high and low beam run ...

headlight low beam r side no power high beam works fine headlight driverside worksfine low and high r side no low beam high works fine Sounds like the low beam element in the right side is burned out.

and out? 2000 Ford Explorer XLT 4.OL if on and off consistently [short cycling ] the usual cause is low or short on freon others are low pressure sensor switch -or clutch failing but the usual problem