Questions & Answers for: loud noise motor

Loud noise My Westinghouse Wired vacuum works fine, but is making a very loud noise. any suggestions? When the motor bearings start to go bad, they will make a loud noise. Some motors if a piece broke

loud clanking noise in dishwasher dishwasher fills with water, then when motor starts we get a loud metallic clanking noise, nothing is obstructing the spray wheels, the noise is coming from the motor

...Loud noise when turning on the heater it only works on the 5 setting and when it works i makes a loud noise that shakes the dashboard what should we do. also AC does not work could it be the switch ...

loud 'drilling' noise from motor area when turned on. electrolux red pet vacuum cleaner makes a loud 'drilling' noise when it's switched on. it does pick up but not as powerful as before the noise ...

motor making loud humming noises Motor making loud humming noises and kicks out. Could this be a capacitor on the motor going bad ? This doesn"t happen all the time, but frequency is increasing. this ...

...loud noise GE Refrigerator GSS201EPWW is making a loud winding noise, in the freezer, right under/close to the ice-maker. This is the fan motor making noise but the fan motor is probably ok. The main ...

...loud noise the tub bearing might be worn out, this is a common problem. The bearing can be replaced.  Clutch If the washer is making a loud noise in the spin cycle, the clutch assembly might be ...

...loud noise the drive pulley might be worn out, cracked, loose or bent. Remove the drive pulley and inspect it carefully. If it is damaged or defective replace it. THE TRANSMISSION, THE MOTOR COUPLER, ...

loud noise when it spins. When unpowered, when I try to manually turn the drum, it is very difficult to turn. What can be the problem and is t something I can do myself? LOUD NOISES IN MACHINE; LOT OF

...loud noise My refrigerator makes loud noise when the motor starts up and continues to make the noise until it shuts off, seems to be turning on frequently. It still cooling,fan still working just ...