Questions & Answers for: GMC loose yourself

Question about 1993 Jimmy

2 Answers

loose and would block the exhaust flow as it increased with higher speed. Hope that helps. probably a clogged fuel filter....the filter picks up sediment from the bottom of the gas tank when you drive

Ad

...yourself. You will need special tools to go further, to depress the lock ring and remove the lock plate. There are 3 screws (torx) that usually get loose, you will need to remove these screws and ...

Ad

...loose from vibration... this should fix it... good luck Pretty common problem with these. Here's a guide to learn how to fix GM instrument clusters yourself, I used it to fix mine and it worked ...

...loose, and the clips are tight, the core may be damaged. The core must be replaced if it is , indeed, damaged. the heater core is leaking. major work for the do it yourself person. this is a shop

Question about 2004 Envoy

1 Answer

...loose and rattles. Continues overheating and kicks the serpentine belt off. What can I do? This is caused by a failure of the water pump bearing. The water pump must be replaced. If you would like ...

...loose, it won't be able to adjust for air flow. You can not test it yourself You need a scanner or back probe it with a scope etc, who has that knowledge Do you have any check lights or codes? Need ...

Question about 2003 Yukon XL

2 Answers

...pressure switch or cable has come loose. More than likely loose cable. It may be the sensor itself that is the problem. Did you change the oil yourself? Check the connection to the sensor. Thanks, ...

Question about 2003 Yukon XL

1 Answer

...loose wire to the fuel pump.has it been wrecked? have to ask yourself alot of questions when you bypass the pump straight to battery and it works. start with simplelest 1st. check main fuse relay and ...

...AC system. Coincidence or did tech do something by accident to cause this problem? you can replace the battery yourself. the only thing you may loose is the presets and the clock setting on the

...rating. Also check your relays to make sure that the relay has not worked loose from the socket. The relay may have failed. It is usually a dealer part but you should be able to replace it

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

2004 GMC Envoy
2004 GMC Envoy

2,225 Questions

2000 GMC Jimmy
2000 GMC Jimmy

1,363 Questions

2003 GMC Envoy
2003 GMC Envoy

1,368 Questions

2002 GMC Envoy
2002 GMC Envoy

1,418 Questions

1997 GMC Jimmy
1997 GMC Jimmy

1,123 Questions

Top GMC Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

john h

Level 3 Expert

29494 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...