Questions & Answers for: loose spring Vacuums

...loose, but the roller just flops around instead of pressing down on the carpet. That lets the clear nozzle drag on the carpet. It seems there should be a spring of some sort pushing the roller down. ...

loose then the spring portions of the plastic ar broken off or the part is install incorectly. We know this from our own experience, we had athe lever replace wrong and when we put it in the right way

...loose, how do I tighten it please? If it is not staying up the handle falls down then is caused by the handle spring assembly. Replace the assembly and it should do just fine. There about 7 different ...

My Hoover steam vac has two small springs that have come loose. Where do I attach the springs to make the brushes spin again? How do I replace the turbine? How do I remove the casing to get to the ...

...loose? Also I assume that the Finger spring and washer seat in the back of the plastic housing and the end of the armature rest on it. Does the finger spring go in first and then the other washer or ...

spring so I don't loose the tension in it? Thanks! Wow an old but a goody.Electrolux rewinds of this age are like land mines. Be very cautious. The G is similar to its cousin the model 89. In the 89 a

loose internally, power cuts off, must pull cord against return spring to a certain position to get it to restart If its the Auto wind cord then fault could bre internal contacts, not easy to get into

spring has a bit of drag .. if its too loose then you can tighten the screw a bit more ... if you tighten it too much then it will pull the top thread thru to the bottom .. if your adjustment screw or

...came loose with a metal spring behind it, i'm not sure how to reassemble it again. Can anyone help me please try this link below ...

...pull it out any farther. If not then the cord could be out of the guides or the cord is wrapped on the pulley wrong. If you can pull it out and it wont retract at all, the spring is loose or