Questions & Answers for: loose chain

Ad

Question about Polaris ATV

1 Answer

loose chain need to know how to tighten chain on polaris 400 atv 1996 I had a few chain driven polaris atv's they tension when weight is on the quad, the rear arm pivots and applies tension to the ...

Ad

...chain is loose. Switched back to the old bar and chain and got the same results. any ideas? check the cog that the chain runs on, the one on the back of the centrifugal clutch they are supposed to be ...

Ad

Question about DCS6401 20 20",64cc Chainsaw 2 Cycle

4 Answers

loose chain My chain saw had been working great until i noticed the chain became loose than normal.. this had never happened before is it possible that the chain can become so loose that i'm not able ...

Question about DCS6401 20 20",64cc Chainsaw 2 Cycle

3 Answers

...loose chain. Chain Adjustment Make sure the chain brake is off (gloves will protest your fingers). If necessary, loosen the bar nuts that are clamping the clutch cover in place (or whatever holds the ...

Question about DCS6401 20 20",64cc Chainsaw 2 Cycle

1 Answer

...chain is too loose or it is worn out. Adjust the tension on the chain. The chain should not hang away from the bar but should be loose enough that you can pull it away from the bar with not much ...

Question about DCS6401 20 20",64cc Chainsaw 2 Cycle

1 Answer

...loose Chain is loose on the dynacraft 20 inch girls bike. Has come off a couple of times. Is there a way to tighten the chain Yes. Loosen the two nuts on the back wheel. When they are loose just pull ...

Question about DCS6401 20 20",64cc Chainsaw 2 Cycle

1 Answer

...will stretch as it warms up. Be sure the side bolts that hold the bar are snug. Lift the bar upward when you are adjusting the chain and while you tighten the side bolts. Never cut with a loose

Question about Chain 520 ZRD Chain and Sprocket Kit - 520 Conversion Kit 5ZRD/116-KSU007

1 Answer

...chain always become loose ?? while driving condition it making a such a little bit of noise i don't know what? it is wheather due to chain or sprocket Both, chains and sprockets have "pitch" if they ...

Question about Chain 520 ZRD Chain and Sprocket Kit - 520 Conversion Kit 5ZRD/116-KSU007

2 Answers

...chain is loose either the tensioner is broken or the chain has worn so much the tensioner can no longer perform its function. The chain should be examined where it runs over a sprocket. If the chain ...

Question about Chain 520 ZRD Chain and Sprocket Kit - 520 Conversion Kit 5ZRD/116-KSU007

1 Answer

...chain is also too loose. I have adjusted the tension mechanism to the max but the chain is still too loose. The chainsaw worked well for 2 or 3 years until this problem occurred. Adjust the chain bar ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top ATVs Experts

john h

Level 3 Expert

23438 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

ray gallant

Level 3 Expert

69167 Answers

Are you an ATVs Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...