looped bottom thread I have tried every thing that is suggested and the bottom thread is still looping any ideas. It was working fine then started looping the thread Sorry I missed your problem, I ...
Question about 1600P-DB Mechanical Sewing Machine
Brother LS-2125 - stitches forming loops on the right side as a sew acing you has loops on it then it is the bobbin tension which is incorrect or the bobbin has been threaded wrongly. A good way to ...
I just bought a memory craft 6600 the thread from the bobbin keeps looping on the top fabric? When I change the tension number it just gets worse Help Check your threading, especially your bobbin ...
janome 4400 bought new bobbin holder but still have lots of issues with thread looping while sewing. The repair person says I pull the thread forward after cutting it and undo the proper bobbin ...
Question about Memory Craft 9000 Computerized Sewing Machine
The top stich is loose on my Janome Harmony 8100, I have cleaned and changed bobbins, but nothing seems to help. Ok, Let's understand exactly what is going on. You said. "the top stitch is loose." So ...
hello dear My Janome 3160 QDC will sew fine, but if I want to do machine quilting just by straight stitching the bottom side thread occasionally will have a loop about1/16 of an inch in size in the ...
machine is jammed, it seems that the upper loop and lower loop are colliding and it seems to be jammed and not able to sew or run properly! have any idea how i can fix it? I tried adjusting the lower ...
thread loops while I sew i should know whether the loop is upside or downward, its opposite tension adjustment , if the loop is downward position, tighten the upper thread tension , if the loop is ...
Question about Memory Craft 9500 Computerized Sewing Machine
why does my janome 8002dx leave small loops on top edge why does my overlocker leave small loops on top egde You'll need to determine which thread is making the loop--also, is it a needle or looper ...
Question about Memory Craft 9500 Computerized Sewing Machine
Janome 415 sewing machine loops on backside of material. We've cleaned and oiled the machine. We're using the right size needle, but intermittently loops form on the backside of the material. Are you ...
Usually answered in minutes!
565 Questions
193 Questions
102 Questions
90 Questions
79 Questions