Questions & Answers for: Cadillac Eldorado no loop current

Question about 1992 Eldorado

1 Answer

1992eldorado codes i need to get definitions for these codes for my 92 cadilac AO48,RO33,RO34,EO23,EO52,EO53,EO58,EO71,IO52,RO42... can you help me??? if you still need the codes, let me know but that

Ad

Question about 1997 Eldorado

2 Answers

Reading Error Codes 97 Eldorado How do I read the codes from the dash on a 97 Eldorado? i think it off and wamer on a/c pannel push and hold off button on heater and up on passenger heatercontrol all ...

Ad

i have 3 ipc codes what does ipc stand for 98 cadillac eldorado IPC stands for Instrument panel control, here is a typical code repair flow chart, this is for example only and has nothing to do with ...

put a new fuel pump but there is no current on the positive wire and where is the fuse for the fuel pump located . there is a fuse box near the fenderwell under the hood that also contains the pump ...

Question about 1996 Eldorado

2 Answers

can i recive codes from my climate contral panel on a 1996 caddy To check the computer for CODES: 1. Ignition switch ON. Engine OFF 2. Simultaneously push and hold the OFF and WARMER buttons on the ...

Question about 1984 Eldorado

1 Answer

I have a 2006 Chevy Uplander and everytime I put a new fuse in my front windshield wiped and turn it in it keeps blowing, what is causing this? your wiper motor is drawing too much current.or there is

I have a 1985 cadillac eldorado would the computer drain the battery if the the computer is not shutting down after the car is cut off A computer would not draw enough current, something else is ...

...the oxygen sensor Have to test the CTS -coolant temp sensor, to make sure it goes into closed loop & you have control over the fuel delivery Too lean-- is either a RICH condition being ...

If you do then get a metal coat hanger and small wood wedge. then untwist coat hanger end create a loop on end so you think it would slide around door lock. gently pull top of door away from body and

...current obd1 codes . Pd codes all normal parameters ranges. pcm supposed to alternate +to- This happens when pcm warms up and goes from open loop to closed loop . I think an electronic component is ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...