...young engineers at GM for improving an age old way of just putting a diamond mark on tooth instead. ...
...lol and when the shop did it with part's cam in at over$1000! that's canadian but if your friend is willing to do it for u, grate but u will need to buy a spetial tool to remove the snap in fuel ...
...i am driving it will start throwing fire out of the carburetor. sell the car to the rock band KISS, lol, no your cam timing is off, could be a bad cam belt/chain, or you have a spark plug wire on ...
Question about 2003 Impala
...lol, The Oil Pressure Gauge Bouncing, You Have Been Giving VERY Good Advice, The Latest Issue on The GM 3.8 with same Issue, Head Gasket Blew and as Far as I can Tell Oil Pressure Dropped at #6 for ...
Question about 1999 Blazer
...lol. with an aftermarket fuel tank id be looking for the same thing. see when running if you can hear spraying back into tank thats with electric fuel pump. I would also look at cam position sensor ...
...cam problem because both of those would make the miss continuous. It might be the converter, but I doubt that too. Take some Ronsonol lighter fluid and some q-tips and clean out the sockets for the ...
...cam sensors. Early versions of the RWD engine and FWD minivans used a distributor ignition system while all of the FWD car applications had waste-spark distributorless ignition systems. The only ...
Question about 2007 HHR
...Lol. Car has given me NO ISSUES what so ever !! Until now!!! Also replaced Crank sensor and or cam sensor ! HELPPP. how much fuel pressure are you getting? I f you do not have a way of testing the ...
...LOL , head back. the upper false pan is not pan and is not sold , separated from the block, as those 2 parts are factory main bearing aligned bored , to exact precision and can not ever be mixed up! ...
Usually answered in minutes!
4,236 Questions
3,219 Questions
2,541 Questions
2,307 Questions
2,177 Questions