Questions & Answers for: Dell logical drive

Replacing the Logic board How do I get into the monitor without destroying it? OK. Start by remiving the cover, fan, adaptor card and power supply. Remove from the logic board: The hard drive power ...

...logical drive cannot be found although the SCSI hard drive is installed and later stops booting with "BIOS not installed!" I tried booting with WinXP, but it couldn't detect a hard drive so I had to ...

...logical drive in which the boot.ini file resides The "BIOS not installed"refers to the SCSI adapter's BIOS, not the system BIOS. It does not install because the hard drive is empty. Access the host ...

...logical drive degraded, fortuneately i had a spare harddisk of same kind 18gb and i replaced it in the bay, i am using raid 5,now after replaceing the harddisk it shows new harddisk added but when i ...

...logical drive and a spare 36 GB 10 k drive. Its called the JBOD RAID option - just a bunch of discs. I don't know of any system that makes a RAID array an operational imperative, I would say the ...

...logical drive drives found dell presicion 670 If the problem would be the logical drives not found it means that your drives are defective. Though it is working but the board on the drives does not. ...

when i want to acces the disck it promt me to format it when i try to open my d: on local hardidk a messege come show that the drive is not formatted properly formatt it..also in cmd i cannot access d

...logical drive with windows server 2008 on it ,I have another i am trying to add and make as 1 whole drive (so 2 x 36Gb drives = 72Gb I hope) but i do not want to mess up and lose my info on the 1st ...

...blockage. How do i unblock or fix this issue? If you mean the hard drive has logical errors then running chkdsk/f will fix that. If you mean the hard drive had physical errors, replace the hard

...logical drive found, how best can i address this situation Assuming this is still an issue...old as it is... You need to boot the server and press the correct prompt to enter the BIOS of your PERC ...