Questions & Answers for: Maytag locking lid Washing Machines

Control panel flashes a "FL" sign According to the manual, this means that the washer failed to lock the door. Can someone help us solve the problem please? Hello washerproble, You mention the Service

Error Code showing UC Maytag Neptune showing an error code of UC Hello plthrsn64 , You should open up a separate problem for this but I will post as a solution for the Lid Lock Issue. For the ...

...locking the lid. Does this happen, do you take the ?FL? fail code in this process? Hit OFF button to cancel this test. 2. I want to make sure you signal an ?OP? alarm to the display. Can you select ...

Fails to lock Back story: Changed to clutch and everything worked fine. Thanks for all who offered advise. Left the front panel off for about 6 loads just to be sure everything was OK. No problem. ...

Lock light wont turn off The lock light will not go off and I can not start it. have fixed it once by pulling out the locks and then pushing them back, the light went out and it worked but not now. ...

the locked light is on but I am able to open the lid. It will not start Hello barbarafreel, Your machine type is a FAV6800A correct? If so I would try to recycle 120VAC power to the machine. Pull the ...

...lid lock position. I don't mind replacing the locking switch if I knew it was the problem. I don't want to throw $60 at a piece of junk and not have it work. I'd rather buy new & cut my ...

why does my lid lock keep flashing? changed lid lock but having the same problem. There is a right lid lock and a left lid lock which did you change? The left lid lock is a lock and the reed switch ...

...lid locking led is blinking after lock the lid and stay standby with out working ? power off by unplug and wait few minutes and again tried but the result is same The unit will not operate in this ...

LID LATCH DIDN'T FIX LID LOCK ERROR I replaced the lid latch on the washer and I guess I should try ordering the lid striker to fix lid lock error (lid lock flashing and washer doesn't work) ...