Questions & Answers for: Fisher and Paykel locking lid

Ad

Question about Fisher & Paykel Washer

2 Answers

fisher & paykel machine locked but lid is up we have a fisher & paykel top loader & somehow i managed to lock the machine however the lid was up. now i cant close the lid and/or use the ...

Ad

Question about Fisher & Paykel Washer

1 Answer

The machine went through a cycle and stopped in the middle of a rinse cycle. Trying to restart, the red lock symbol kept lighting up and would hear the lid lock mechanism activate. Tried switching ...

Ad

Question about (IWL12)

1 Answer

i get sevice code 234, what does it mean 234.(11101010) Phase 6 - Lid Lock Open Circuit Check Harness to Lid Lock and connections at the Motor Control Module and lid lock ends. Primary Fault: ...

Fisher and Paykel GWL11 Top Load Washer Lid Lock Switch Location? Is the lid lock switch that assembly under the hood deck? I think I need to replace the lid lock switch but looking at a parts manual,

washing machine top loader aqua smart the lid cannot lock while washing. I have tried switching the machine on and off, still won't work. This happened a little while ago but then is rectified i ...

Question about GWL11 Top Load Washer

1 Answer

...lid not locking? I will load machine, close the lid, select program then start machine. The machine will begin to fill up with water and just before the cycle starts, the machine will stop and a ...

Question about GWL11 Top Load Washer

2 Answers

LID WON'T LOCK & LID LOCK LIGHT WON'T COME ON WASHES BUT WON'T SPIN...LID LOCK LIGHT DOESN'T COME ON WHEN THE START BUTTON IS PRESSED AS PER THE MANUAL. I would suspect that your lid lock switch ...

Question about GWL11 Top Load Washer

1 Answer

fisher paykel GWL15 96200B lid will not lock Lid will not lock # 2&3light green spin light red and keeps beeping Change lid lock its the lowest cost part if not lid lock main PCB is bad High dollar ...

WL80T65CW1. Why is it displaying fault 234 and will not cycle? I OPENED THE LID LOCK & IT LOOKED A SALTY CORROSIVE TEXTURE ON EACH END OF CONNECTION. ALSO THE TOP LID GROOVE THAT SLOTS INTO THE LID ...

Fisher and Paykel WL80T65 lid lock error keeps coming on? What can I check? Have removed the lid and tightened mechanism screw that attaches to lid, any other ideas on what to check. If lid lock error

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Fisher and Paykel Washing Machine Experts

Dan Webster
Dan Webster

Level 3 Expert

8221 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3056 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1482 Answers

Are you a Fisher and Paykel Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...