Questions & Answers for: Canon Eos locked compact flash

Err 02 I get nothing from the camera. Only "Err 02" shows up in the LCD panel. Help! try another Compact flash card or at least reformat it. That might fix it.

...compact flash card . Then i turned the camera back on i tried to format the card but error 99 came Bent/broken card reader pins. Take a flash light and look inside the card reader. There you'll see ...

...to do with the compact flash card or battery, or do I need to add a flash? I think you use a cheep card which has low speed, so can't save photos as fast as needed. test a fast one. I hope this ...

compact flash connector pins bend/pushed inside I have a Canon Digital camera which uses compact flash as picture memory. For some reason a couple pins inside the camera are bend and 2 pins are ...

...the value of the camera, there is a very good chance that you can repair this yourself. Please see the following: ...

...compact flash card. Could that be the cause of the power problem? check inside where the compact card went. Shine a torch if necessary and see if all the pins are straight. If they are bent it will ...

card protected Card says protected and has images that wont erase and wont download! I NEED these pictures on the card! There is no lock switch on the side of the compact falash card. I found protect ...

...needs to be slide forward to the top of the card to unlock. Once done the card should perform the same way as a Compact Flash card. Picture here If this is not the problem I would suspect a faulty ...

...a fail at the CF PCB (compact flash printed circuit bard) and it is necessary to change the board. Sometimes the problem is the "bent pin syndrome" that frecuently occurs by using cheap Flash

compact flash card out, and the attached lens off of the camera. Leave the camera set for a while for the capacitors to bleed off. Around a half hour would be good. Next re-insert the battery and push