...Lock should retract. Repeat for second code. If both codes are working, replace plastic cover over electronic panel. Position top of cover, then snap bottom of cover into place. User manual is ...
...off its already scratched from b4 whats the trick . Here's a link which tells you how to remove the cover, and reprogram the lock codes: ...
...Prongs 2 & 3. A is right handed, B is left handed. Here's a link which tells you how to remove the cover, and reprogram the lock codes: ...
...Prongs 2 & 3. A is right handed, B is left handed. Here's a link which tells you how to remove the cover, and reprogram the lock codes: ...
...Prongs 2 & 3. A is right handed, B is left handed.Here's a link which tells you how to remove the cover, and reprogram the lock ...
...to the Frequently Asked Questions page, which illustrates how to remove the cover: ...
...off to change batteries Removing the cover is described and illustrated here: http://www.weiserlock.com/Support/Faq/50160000000HhhZAAS.aspx "Press down on the inner battery cover (as indicated
How to remove covere to replace batteries? Here's a link which tells you how to remove the cover, and reprogram the lock codes: http://www.weiserlock.com/Support/Faq/50160000000HhhZAAS.aspx
...lock? First remove the cover on the inside of the Powerbolt unit. On the right hand side under the batteries, you will notice that is says "Door Direction Jumper". If the cap is mounted on Prongs 1 ...
Question about GED1460X3BR Lifetime Polished Brass PowerBolt Powerbolt Touchpa
...keysless lock? how does the cover plate come off? Not sure on a Weiser but on mine there are small Allen screws on each side of the cover that have to be removed that allow the cover to be
Usually answered in minutes!
208 Questions
126 Questions
15 Questions
14 Questions
