Questions & Answers for: Sears LiftMaster lock blinking

...blinking? Unit somehow got into lock mode, even though you do not have lock button. If this has stopped light from blinking, you now have to code remotes and or keypad back in. Push the little buton ...

...It is related. One of the buttons on your wall control is the lock button and has a lock icon on it. Press and hold it for 3 seconds. The blinking should stop and your remote should now

what is my problem? If the small light in your wall control is blinking it is in the lock mode. Press and hold for 3 seconds the button with the icon of a lock. This will toggle the lock function off

Blinking light appears locked. How do I unlock it? If you mean the light in the wall control is blinking you need to press and hold the button with the lock icon for 3 seconds.

...turns off immediately. How do I get it to stay on for about 5 minutes? Try this: Press and hold the Lock button until the light blinks (about 10 seconds). A single blink indicates that the timer is ...

but stills blinks. I pulled the power to let the opener cool down. Press and hold for 3 seconds the lock button on the wall control

...it works to open/close the door. The remote does not work. Any suggestions? Press and hold the lock button on the wall control for 3 seconds. The light will stop blinking and your remotes will

but the garage door does open Press and hold the lock button for 3 seconds to stop the light from blinking. That blinking is the indication that the lock function is on and your remotes will not work

...pad.???? Try pressing and holding the lock button for 3 seconds to stop the light from blinking. Your wall control may be bad. Usually when that light is blinking it is the remotes that will not

...Do I need to replace the control panel? Locate the lock button on the wall control. Press and hold this for 3 seconds. The blinking of the light should stop and your remotes will once again