Questions & Answers for: where is locator on the base

Ad

Question about i6772 Trio Cordless Phone

1 Answer

VT ip8100 - enter base id problem both handsets display "enter base id" after an attempt to fix a broken vonage connection through the customer service help line. i enter the number on the sticker on ...

Ad

Question about KX-TG2740 Cordless Phone

2 Answers

...base. 2. Hold down the LOCATOR button, while plugging the AC Adaptor back. 3. Once the base indicator lights come back on, release the Locator button. 4. After less than 5 seconds, hold down the ...

Ad

Question about KX TG1000N Cordless Phone

1 Answer

...off When the Charge light stops flashing, press Locator again In about 20 seconds, the handsets will deregister. When the displays read "Enter Base ID", deregistration has been completed

Question about KX TG1000N Cordless Phone

1 Answer

set > registration > base 1. When it requests a pin enter your pin 0000 BUT DO NOT HIT MENU YET. Hold the handset locator button ON THE BASE for 5 sec. then press MENU on the phone. It should register

...Locator on base and when I do that the base beeps like it's supposed to, but never locates the handset. The handset message never goes away, I can't even get into the menu. (Got this from a Panasonic ...

Laptop does not connect to location free base upon restart I have a SONY laptop and SONY Location Free Base Station. When I turn my laptop off and later turn it back on I can no longer connect to the ...

Question about LocationFree Base Station

1 Answer

can't locate the water filter. water has a bad taste i can't locate the water filter on my kenmore coldspot refridgerator (106.58214400) The base grille water filter is located below the freezer ...

Question about LocationFree Base Station

1 Answer

...Locator" button on the base and hold it until the "in use" light comes on ( ~ 4 seconds ), then release the button and set the new handset into the base phone cradle. After ~ 30 seconds it will beep ...

...LOCATOR on the telephone base for about 10 seconds (until the IN USE light starts to flash), then release the /HANDSET LOCATOR button. Immediately press /HANDSET LOCATOR while the IN USE light is ...

New KX-TGE233 set. Only phone in room with the base works. Other two phones are 35 ft. and 60 ft. away from the base. These two cut out so much they are unusable. All batteries are new and fully ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Lands Phones Experts

Ekse

Level 3 Expert

13434 Answers

Cindy Wells

Level 3 Expert

6073 Answers

Marvin
Marvin

Level 3 Expert

85223 Answers

Are you a Lands Phones Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...