Questions & Answers for: Chevrolet Corvette location of ecm

Ignition Timing Following Top End rebuild, engine started. Went to check timing, engine runs well, timing mark on harmonic balancer not visible, turned distributor all the way to get mark in view, ...

Need to remove ECM out of my 1985 Corvette I have a 1985 Corvette, I need to remove the ECM to change the Prom out. My Chilton manual says it's in the dash behind the passenger side dash pad. I can't ...

Over heating on 84 Corvette The cooling fan wont come start on my 84 vette. The relay is new and so is the fan swicth. If I ground the wire from the swicth the fan comes on. Do you think I may need a ...

99corvette overheating cooling fans not kicking on fuses and micro relays seem to be good Hi, I put together a guide that will help you diagnose this issue. it will help you troubleshoot all problem ...

where is the Engine control module i need to locate the ecm on a 1981 corvette? Does anyone know where its located and what it looks like? surly a car that old wont have a ECM think you will be lookin

Where is the ecu at in a 00 corvette? Where is the ECU or ECM located at in a 00 corvette . Thanks Under the hood just above the battery

1987 corvette cranks but wont start has fuel psi [50]and has spark. The ignition module located inside of the distributor is what generates the signal that the ECM (Engine Control Module) uses to time

lost inj. pulse need to know where the ecm gets crank position from. if from dist.how does it locate #1 1985 crovette Lost injector pulse. First injector power is supplied by (IGN+) or fues block ,The

...ECM for that circuit. Below is another picture and I have marked the location of the ground you need to check and maybe clean as well. The wire for that circuit will be a black and white wire. There ...

Where are the ecm grounds located on my 93 vette? A mechanic thinks I might have a bad ground causing the injectors to only pulse twice, engine runs for about 2 secounds have a look to this hope it ...