Questions & Answers for: load tray one

...tray will not load or close-reopens immediately The drawer for loading cd's closes but reopens immesdiately. I have taken out all the cd's and still will not stay closed. What does happen is the ...

LOAD PAPER TO TRAY 1, BUT THERE IS PAPER IN TRAY 1 IF IT IS THE ONE AT THE BOTTOM. TOTALLY CONFUSED. BOTH THE PRINTER AT A STORAGE SALE. Try loading paper in both trays. Tray '2' is supposed to be the

load paper tray ..... now it acts as if there is no paper tray has anyone got any advice Have you loaded both trays? The bottom tray and the upper tray ? The one that folds into the machine. Something

...load completely that's why opens after attempt of loading. You need to open top cover of unit and inspect loading belt might be lose, tray timing can be out of phase, some wire got stuck with tray ...

load main tray 1. Insert the media print-side down along the right of the main tray. Make sure the stack of media aligns with the right and back edges of the tray, and does not exceed the line marking

...1 Sounds like you have a mismatch in the paper you are trying to print on and the paper that is loaded in the printer. HP printers look to feed paper from tray 1 anytime the computer settings ...

...load Tray to load Any supported photo or plain paper media 1. Extend the Main tray by pulling it out with the Main tray release or the tray grips. Load the Main tray Chapter 2 (continued) 12 HP ...

...load that paper type/size, or you can override the request by selecting a different type/size at the printer control panel.
If a tray runs out of paper during a print job, the printer automatically ...

...select any cd .and tray comes out again. main problem is it do't select any cd You have a slack loading belt under the tray.The loading action is not being completed because of it. The Cd lifting ...

...Load Tray 2 with only U.S. Letter or A4 plain white paper. Slide the paper guides in so that they rest against the edges of the paper. Carefully reinsert the tray into the printer, and then push the ...