Questions & Answers for: load cd

(loading tray) opens back up as to accept a request to load or change cd's. I have loaded the tray with cs's but as quickly as it closes it reopens. Sounds like the tray position switch has gone wrong

...cd's a lot of times will not load at all, once loaded plays fine what can i do to correct this or can i hi does it try and load ie does it feel like the cd is slipping? it could just be the rollers ...

load a CD into the CD player. The manual says hols the "LOAD" button when the display says load CD, load it. I have tied many times but the LOAD CD does not show up on the display neither it takes the

...change it to CD by pressing the CD button. Stick a CD in the slot and then press Load. Wait for the CD to load. Now stick another CD in the slot and press Load. keep doing this until all 6 are

...and then opens...it does not retain the CD inside to play... Hello This fault is due to loose tray loading belt or weak loading motor. You just change the loading belt with same type. Never use a ...

...has trouble, the CD tray wont cole out, or load in properly.  You have to check and find out which part is faulty.  In normal cases, replacing the loading belt will rectify this problem.

...load the cd....... if i take the fasia off the front i can load the cd...... does anybody know if the cd mechanism needs a rubber band that needs to be replaced?? also does the dns1200 have the same ...

...load CD's except if I load as a single...this is supposedly a 6 CE changer, but cd's don't feed into player from the holding cassette....any ideas? The magazine may be defective or may have a CD ...

...for Loading but there is no instruction and nothing is loading. put cd in switched to cd mode and pressed play The player mechanism my be defective. The CD should load automatically when

CD won't load. I press load and am instructed to select one of 6 slots. I finally figured out how to select different slots, but the CD still won't load. advice? cd wont load if there is already a cd ...