...to on the motor.pretty simple job.The car may run hotter with the A/C on because it has to work a little harder to run A/C pump.But when A/C is on so should the A/C fan which should help cool it a ...
...then the intake hose can be moved to give you the needed room and the air filter comes out with little ...
...housing. Do not disconnect the sensors attached to the hose as you only need to move the hose a little bit toward the windshield/firewall for extra room. On the left side of the filter housing, ...
...thermostat and gasket[careful tightening the bolts do them each just until snug then turn them in a little at a time switching bolts often].Put the hose back on,tighten the drain valve top up and run ...
...Remove the bolts (not the hose) and lift the housing to expose the thermostat (may require a little prying with a screwdriver or similar tool). Note how the old thermostat is fitted (which end ...
...them and remove them from the housing. if it doesnt practically just fall out, you dont have the little ears lined up with the relief holes. once you get the socket out , if its a tiny bulb ( they ...
...can ignite the leaves, this can cause at the very least smoke coming out the vents, which can be a little exiting on the
...There is a circlip near the end of the axle splines that fits in a groove inside the transaxle- a little force pushes the circlip out of the groove, and axle is free to come
...Unscrew the 2 or 3 bolts. Take the housing out. Look closely at the one you replace, because that little metal thing that dangles should be placed at the 12 o clock position. Don't forget to put ...
Question about 2008 Town & Country
...little house that connects the back of thermostat housing to the Heater Hose Assembly on a 2008 Chrysler Town & Country Touring Ed Didn't run hot but that small hose busted and I need to replace ...
Usually answered in minutes!
1,229 Questions
1,289 Questions
1,198 Questions
1,079 Questions
1,173 Questions