Linksys SD208 8-port switch i need to open the case and get to the PCB... i need to do some testing and fix the unit. i need to know how to open the case please... you have to lay it on his back and ...
usb trouble i have a cisco linksys usb i dont know how to use it this port is use for update ios
sd208 used for Hi, Its a 8 port ethernet switch. You can connect this device into your network and connect more devices on it. For more information please visit the link below. http://www.cisco.com/en
...LINKSYS sd208 HI The linksys sd208 is a switch and switches do not have a DHCP servers. You will have to look at your router or if you have a server for the DHCP server. As linksys doesn't have a ...
Question about SD208 8-Port Ethernet Switch (SD208KIT)
...LINKSYS SD208 and only one PC is connected at a time.I am using an ip and want to conncet multiple PC at the same time. You can find various document from below link ...
...linksys sd208, it says unidentified network. what seems to be the problem. thanks hi, this is a default check that windows does when a new network is detected "wireless or wired" you must select the ...
Question about SD208 8-Port 10/100 Switch (J556464)
what is the default ip address for Linksys SD208 switch? there must be ip related to these: 192.168.0.1 192.168.1.1
LINKSYS SD208 SWITCH This unit does not require configuration. Simply connect main drop / ISP modem and use. The ports are auto detect, so basicly you can use any port. Uplink and / or crossover ready
Port LEDs keep flashing in sequence. Nothing is plugged into the rear ports. It has power only. It just keeps flashing the ports LEDs in sequence. The ethernet switch maybe scanning the ports for ...
how can I reset? Hi, this switch is not configurable (L2), and thereĀ“s no special reset botton, so the way to reset it is power off and power on.
Usually answered in minutes!
19,138 Questions
12,216 Questions
7,310 Questions
7,277 Questions
5,472 Questions