Questions & Answers for: Briggs & Stratton linkage spring

...linkage. If the spring is OK & throttle linkage is not binding it could mean the governor drive inside the engine has failed preventing the governor from operating correctly. You may need to take ...

...linkage yourself. The spring is attached to an arm that goes back under the cowling. That are has a blade on it the sits in the airflow of the motors cooling fan. As the motor runs faster the blade ...

...spring attaches the governor arm to the throttle linkage. The choke cable attaches to the shaft farthest from the engine. I hope this helps. PS your engine has two factory service bulletins on it. ...

...position? check youtube,guy on there has pics of spring set up,and still pics to follow the video.check this name on youtube:4 HP Briggs & Stratton Quatro Motor Spring & Linkage Close Up ...

...spring that fits from the loop in the throttle linkage to the plate at the front of the motor. There may be one other spring if it has an auto choke system that fits from the choke lever to the ...

my B&S 13HP engine, model # 28M707, is always on high revs, have checked throttle cable and levers and linkages next to engine but can't see problem. can you advise please my B&S 13HP ...

...spring to attach to. There is a very easily bent little linkage on the carb of some Briggs mowers that , when hit by a low branch, bends back and drops the mower to an idle . Have a look where the ...

...spring. Along with the the linkage rod from the governor arm to the carburetor should be a small spring as well, check it and make sure it hasn't come loose or even fallen completely off. This spring ...

how to set 24 hp briggs and stratton governor linkage need to see the proper placing of springs on carburetor linkage V -Twin or opposed?

...Linkage Spring replacement on Briggs Stratton Quattro 4 HP Murray Lawn... Repairing Lawnmowers For Profit Part 61 Governor Spring Help briggs and stratton governor linkage diagrams Google Search ...