Question about 55612 / 55614 / 5561 / 655619 Side by Side Refrigerator
...light quit working, then check the bulb first, if it's good then use a meter to check if you are getting power to the socket (red lead to middle contact, black one to the metal ring) check with meter ...
...element. Using an ohm meter or test light,test the heater element to see if it is open. If it is open the meter needle will not move If a test light , it will not light. If true then replace
...light. The only thing I don't know how to check is the very expensive Dryer Timer. Item's I did clean and check: - Cleaned Thermal Cut-off & Continuity (w/Ohm Meter) Good - Cleaned Thermal Fuse & ...
Question about 53642 / 53644 Side by Side Refrigerator
...meter peg out if it doesn't peg either way the switch is bad get model # and find a parts store.if switch tests ok then problem may be at light socket. make sure light bulb is screwed in tightly ...
...light should come on in the poor man's meter) If you come across an thing near the blower housing with 2 wires attached to it, that is a thermal limit, a safety or a control thermostat (So as not to ...
...light should come on in the poor man's meter) If you come across an thing near the blower housing with 2 wires attached to it, that is a thermal limit, a safety or a control thermostat (So as not to ...
...light should come on in the poor man's meter) If you come across an thing near the blower housing with 2 wires attached to it, that is a thermal limit, a safety or a control thermostat (So as not to ...
...light should come on in the poor man's meter) If you come across an thing near the blower housing with 2 wires attached to it, that is a thermal limit, a safety or a control thermostat (So as not to ...
...light should come on in the poor man's meter) If you come across an thing near the blower housing with 2 wires attached to it, that is a thermal limit, a safety or a control thermostat (So as not to ...
light won't come on. Usually just working the switch and cleaning any sticky stuff from it fixes the problem. If not and you have a meter, you can check the switch. If it checks bad with a meter, then
Usually answered in minutes!
1,239 Questions
824 Questions
623 Questions
625 Questions