Questions & Answers for: lg front load washer adding

LG Front Load Washer About 2 out of ten loads creats a big puddle of water on the floor. I have examined drain lines. There is no leak or overflow from the tube. Also all pluming connections are tight

...LG front load washer, I can manually add another 1.5 gallons of water if I choose the permanent press cycle. I choose permanent press and press the button for extra soil so that the wash cycle lasts ...

LG front load washer/ clothes still wet after final spin I washed a medium weight jacket and after the Speed Wash was complete, the jacket was still soaking wet. I put it through the Rinse/Spin cycle ...

...front load LG wash machine. It is normal for the machine to cycle between hot and cold water when filling even if selecting a cold cycle. The reason for this is because even a cold cycle requires the ...

LG front-loader. We made the change because the washer was old, had been repaired a number of times, and still we'd find spots on our clothes after they were washed. The problem is continuing with the

...LG front load washer makes a very high pitched sound when the water is being added during the wash cycle. As soon as the water is added it goes away. Hello. The high pitched sound is a definite sign ...

lg front load washing machine does not seem to get the clothes clean. I think it is because it uses so little water??? How can it get clothes clean with just a few cupfulls of water? All controls and ...

...washer wont stop adding water and it wont drain the water. any ideas A small tube running up the side of the tub carries air prussure to tell the machine to stop filling.Mos likely the hose has ...

front end LG washer! My co-worker on my first week of work started buying bath and body sprays and body wash leaving it on my desk. I'm so pissed off because my washer was so expensive and now i smell

...front load wash machine does not have a place in the dispenser to add liquid bleach. How do I add it to my laundry without ruining my cloths. Thank you I hope this is helpful Use a container, such as ...