Questions & Answers for: lexmark t642 clean

...blade Do you know where the wiper blade is located on the T642 Lexmark printer? When you say wiper blade, do you mean the one in the cartridge? There's also a cleaning wand in the top of the

Lexmark T642 - print is very light We have a Lexmark T642 printer and have replaced the cartridge because it was printing to light. After replacing the cartridge with a brand new one, it is still ...

Lexmark T642 Laser Pinter Problem Hi, This is a call for service message generally requiring professional repair. There are generally only four reasons: No power, Check fan power leads as one may have

Lexmark T642 printer keeps printing all pages with black lines on both sides of duplex This is due to dust is accumulated on the tufflon drum. Clean the same will resolve your problem. Revert back for

Lexmark T642 Printer giving me a paperjam error#241.10. There is no paperjam Normally this is caused by either a small piece of paper stuck in a sensor or a bad sensor. Lots of times printers use ...

...left but there no adjustment on that side. lexmark t642 Your rollers could be causing this problem. Your printer could use a Mainetance Cleaning done by a certified technician to resolve this

...Lexmark T640, T642, or T644 Printer. Just click on this link: http://bit.ly/b71goj. Follow the instructions carefully. Hope this helps. There is a product called Rubber Rejuvenator that you can pick ...

Lexmark T642 as it is starting to leave large ink drops on the paper A T642 has no "heads"as in an inkjet. "Drops" on the paper are mostly caused by a leaking cartridge. So try replacing the cartridge

service fuser error, what does that mean? The Fuser is the part that melts the toner onto the page. It is located in the rear of the machine, the rear cover must be removed to expose it. Most likley ...

printing is covered with black carbon all over the page Try cleaning your rollers.Also make sure that your toner is leaking. Hope this helps.