Enter K ink level by presing ---> then OK 6) select 1 by presing <--- or ---> then OK 7) Press reset ( design: // ) hope this helps thanks for your rating Fiend your solution direct from Lexmark. Here
...lexmark's web site it says to re-set it by going into Tech mode Can anyone help me with this as the instructions on Lexmarks site does not do it many thanks hedgehog press menu-#-1-9-3-4 with the ...
Question about X5250 All-In-One InkJet Printer
Lexmark Support. In the "Search by Model" box enter x5250. When the model pops up, click it. In the "Search the KnowledgeBase" box enter "searching for scanning applications". Click "Search". You will
Lexmark E352DN Error 31 I have the error 31. Toner was changed with an original new product but always the error message. I can't enter in service mode to reset counter. Sensor error? Formatter error?
...lexmark that will not post if the network is not recognize replace the network card and im sure your proble will go away. it colud be the logic board as well but only about 5% of the time my money ...
...Lexmark support has a reset procedure that is explained in two rather lengthy support articles, performed one after the other. Start with the "this article" link in step 1 to enter the printer ...
...Lexmark&model=C935&code=925.00 Code 925.00 Description Service PC cartridge Sensor (Y ATC) Remedy 1 Reset the Y ATC failure lock out condition. 1. Enter diagnostic mode 2. Select Dev unit ...
Question about Prevail Pro705 Wireless All-In-One InkJet Printer
lexmark prevail pro705 printer to phone galaxy s4 having trouble connecting my printer to my phone and both are wireless Enter the Service mode following the procedure below. (1) Turn off the printer.
Question about Prevail Pro705 Wireless All-In-One InkJet Printer
how do i enter service mode on Bizhub 3320 Config Mode is depress 2 and 6 and power on. Diagnostic Mode is depress 3 and 6 power on. This is a Lexmark machine with a Konica Minolta logo
LEXMARK T632 FROZEN Hi. I have a T632 printer. I have the same problem. Frozen on normal node motor not running at all; When I turn it on while pressing the select/ back buttons to enter into service ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions