Questions & Answers for: lens tight zooming

...tight on the principle subject matter, *focus* and then return to the framing you prefer. The camera"s lens system doesn't care. This procedure is largely for your own confidence that the visual ...

...is ok but when you zoom the lens, the movement is tight. Due to friction the iron guide rods on which the inner lense assembly moves get bend. an expert repairer will solve the problem in no

lens barrel will slide out from 100mm position to near the 200mm position with little resistance. Conversely, if set at just lower than 200mm and pointed upward it quickly! slides in to 100mm position

...lens retract assembly due to a crack or wear or jam 2nd guest .. zoom errors means its really stuck tight the gears can be ordered and replaced and one more possibility is that the motor that drives ...

...lens is brand new. Some other lenses have a Zoom lock to prevent it. What I did was to slip a flat rubber band around the black area just behind the zoom ring, the area where there is s white mark or ...

...Lens cover not tight enough to keep power on. When I slide the lens door open the camera powers up correctly. However the least little pressure on the lens cover moving it ever so slightly causes the ...

...tight setting any clue? your lens may be damaged...your zoom assignments may need to be realligned if there are no broken parts. If there are broken parts in your lens it may be better to get a new ...

lens 18 - 70 got stuck it is unable to zoom Due to the tight tolerances inside the lense mechanism - small bits of sand or lint may become trapped in the mechanics. It is advised to take the camera to

MY CANON EF 100-400MM USM LENS WON'T ZOOM PAST 150MM Is the lens tension adjusting ring too tight? Try loosening it and see if you get increased travel. If so, you may need to have it checked out.

lens is tilted at an angle and wedged tight and the barrel of the zoom will not retract. I've tried turning it off and on, and even using the automatic focus while doing so. Any thoughts as what to do