Question about Digital Rebel XT / EOS 350D Digital Camera with EF-S 17-85mm IS Lens
Error Message What does error 5 on a canon Rebel XT mean? Error 5 indicates - Something is obstructing the built-in flash....
Question about Digital Rebel XT / EOS 350D Digital Camera with EF-S 17-85mm IS Lens
Error 5 If you get Error 5 meaning that the built-in flash is obstructed how can you fix it? ME TOO! ANY ANSWERS?
Question about PowerShot SD550 / IXUS 750 Digital Camera
error #18 Lens will not close and camera shuts off how do i fix it Hey louboyens, According to the manufacturer error code 18 is a lens error code. What that means is something is obstructing the ...
mean there is something obstructing the movement of the lens (i.e. sand). You could try blowing compressed air into the side of the lens to try and dislodge whatever is in the lens. You could also try
Lens Error My lens will not retract with my camera. When I turn it on it cuts back off and says lens error. It sounds like the lens is stuck. please help me. Hey Joy_2008, A lens error usually means ...
Wont focus clear My camera is saying focus error,what does this mean? the lens for the focusing has been obstructed or damaged. possible solution: [email protected]
Question about EasyShare M532 Digital Camera
...mean? On my screen it says Lens Obstructed. What sdoes that mean? Hello, That means the CCD assembly is not transmitting a full image to the cameras internal circuits, needs to be diagnosed and ...
Question about EasyShare M532 Digital Camera
the lens cap, please check there is no mechanical obstruction on the lens. Then switch on again. When the error keeps coming back you should ask advice to a Nikon certified crevice centre close to you
...obstruction mean Screen says turn the camera off, remove lens cap or obstructin and turn the camera on but lens cap is off Is mirror in locked up position? In manual mode? Especially if the lens is ...
Question about EasyShare M532 Digital Camera
...mean the lens is not fully out, the sensor is defect, or the wiring in the camera is defect. You should check if you can see any damage to the lens barrel, causing the barrel not to move fully ...
Usually answered in minutes!
1,383 Questions
1,133 Questions
959 Questions
944 Questions
808 Questions