Questions & Answers for: Panasonic Lumix lens will loose

loose or knocking slightly. I presume its the extending lens and wondered if this is typical for this camera? It's normal, it's noted in the manual. What you call a "knocking" is the lens element used

...is a very delicate mechanism, including small coils, motors and the actual lens. If some of this components get loose, they can jamm or damage other parts, preventing the lens mechanism to

...loose or change it's possition, there are many reasons. In order to fix this, the camera needs to be dissasembled and the lens unit should also be opened. You will need very delicate tools and it's ...

...loose blocking it, but not. What do I have to do? Hello The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the probability is that you will ...

...loose on Lens zoom ring (around shutter release) loose on the back side. Afraid it will come off entirely. Not sure how it got out of position, or how to get it back. must to open ur camera and ...

...cleaning the lens. Sounds like a cold fault (only faults when first on mostly) or it could have a loose connection, or the CCD (picture taking device) faulting. It needs to go in for service.

...loose, by using your hand you will hopefully not do it too hard or it will hurt. You may need to do this a dozen or so times in different places to work. I have found the flat of the camera bottom ...

...lens, they sometimes get out of sync. Believe it or not, take your camera and wack it into your open hand, with the screen side. Remove first all rings on your hand or you might loose your screen. If ...

...like your camera's lens is broken. Did you accidentally drop it? When you shake your camera, do you hear something moving inside? Like a loose part? Or looking in the lens do see anything

...lens is not moving,,how can i fix,,can you help me the len is loose and not fixed,so it can not focus and take picture.check whether it is in a bad damage,and then you can send to the repair ...