Questions & Answers for: left right mono

...left and right speakers work.  All the connections seem good.   Thanks for any ideas! Ken I would be checking the set up mode , you might have it set to left or right channel only , but in ...

right and left channel circuits needed for stereo. If you are connecting a stereo source like a DVD player, what you can do is combine the right and left channels into one and connect that to the mono

...and play with them. It sounds as if you are not sending to that side. You should use mono cables into left and right. I set pan on left all the way left and right, all the way right. Hope this

left and right input cables for the TV and see if you get the left cahannel working. If so, investigate a possible bad cable or output issue from the TV. I think that your tv signal hav mono audio. In

need to wire to mono block amp never wired a 4 voice coil to a mono block 4 ohm voice coil? on the mono amp it should be from left to right ++ -- you want to go + x x -

left and right signal. Or if your VCR supports it you can set it to mono output. Otherwise, just use the white (left) cable to feed the mono input (white) and of course the yellow to yellow for video.

when i plug my mic in input 1 i get left pan when i plug it into input 2 i get right pan how to i get it to work for both left and right Most micraphones are mono, set the recording channel to mono.

...to side. You MAY be "panned" clear to the right. When you plug into the left, it is the default so in spite of being panned right, they would send signal to the left IF nothing is plugged into

...recording in stereo is not practical. Stereo inputs are left and right (two inputs). Whatever your recording setup or audio workstation, the track you record to from your microphone needs to

...left and right of a stereo signal is fed into the respective inputs will reproduce the stereo sound through the left and right speakers. Mostly there is a mono/stereo switch so if only a mono signal ...