Questions & Answers for: lee loader

...loader and the agitator does not turn forcefully as it should. It kinda moves a bit and jerks a bit but not like normal. If during the wash cycle I hold my hand on the top where you put the fab ...

Loader -flashing F and H I put a load of clothes in washer and water fills up then it stops its cycle and starts beeping and flashing F and H. Start the "spin/drain" cycle and try the load again. Same

...it out. Though I would recommend replacement as it is most likely time for a new one. Thanks, ...

...loader washing machine model wi 121 While I was abroad, a couple of weeks ago someone used my washing machine and must have "forced" the front loading door to open with the result of wickening the ...

...loader, model # MAH5500BWW had a digital error code reading Lr. Will not agitate or spin out. the LR code means "Locked Rotor". when this happens the cause is one of two items. 1) the circuit boardat ...

...loader will only move about 5 inches to the left and right.I have checked the belt and the detergent draw. I also made sure the boot was free of gunk and checked for nails or other objecks. This ...

...then any talking. Hope this helps if you have any other questions please let me know. Thanks, ...

...it be? Welcome to FixYa.com check at top of brake pedal is the noise loader ? try to lay back look yp into dash where the brake pedal is and see if there is any wires hanging down, Regards Lee ...

up a lot of water, so try to put in lee close and less heavy close. If this does not help then you might have a problem with the damper shocks (leaking) or springs (broken) if it a front loader washer