Questions & Answers for: led code

Code Entry. If the LED INDICATOR blinks four times when the component key is released, This means that a programming error has occurred. In that case, repeat the Direct Code Entry process from step 2.

...until the TV turns off. The LED will blink once each time you press the ON/OFF button. Once the TV turns off, press the ENTER button to store the code and the LED will turn off. I hope that

...you press the ON/OFF button. Once the TV turns off, press the ENTER button to store the code and the LED will turn off.I hope that helps. The one that worked for myself was 000 for a TruFlat RCA ...

...until the TV turns off. The LED will blink once each time you press the ON/OFF button. Once the TV turns off, press the ENTER button to store the code and the LED will turn off. I hope that

led will flash if code is entered wrong led will remain lit but not flash Note if one of the digits of the code is a zero after the single flash DO NOT press button but wait for next request and enter

...code and the LED will turn off. To program the remote for your VCR, repeat this process starting with turning the VCR on, then follow the steps substituting the VCR button for the TV button. I hope ...

LED blinks, and the next code in the list is sent. This process continues until all of the codes in the Code Lists have been tried. If your component turns off, you have found the correct code. (If it

...until the TV turns off. The LED will blink once each time you press the ON/OFF button. Once the TV turns off, press the ENTER button to store the code and the LED will turn off.I hope that

...until the TV turns off. The LED will blink once each time you press the ON/OFF button. Once the TV turns off, press the ENTER button to store the code and the LED will turn off.I hope that

code list). 4. The LED will flash once as each number is programmed at the end of the 4 digit the LED will turn off immediately if correct. If the LED flashes then something went wrong in the process.