Questions & Answers for: Fisher and Paykel leaking tap

Question about GWL11 Top Load Washer

1 Answer

tap is leaking at the wall, you will have to change the tappets. You will need to close your main water at the timer, then undo the actual knobs, depending on the tap. Once opened take out tappets and

Ad

Question about GWL11 Top Load Washer

1 Answer

...leaking (dripping) into the drum when machine is off. Drip is coming from where water dispenses into the machine to fill the drum. Hi just read your posting.The fault with your machine is a faulty ...

Ad

Question about GWL11 Top Load Washer

1 Answer

...leaking from bottom of machine however I cannot find a leak when inspecting from the bottom with the machine tilted back. Fisher & Paykel model GWL11. I have not been able to determine when ( ...

Question about GWL11 Top Load Washer

1 Answer

I only use cold water & as soon as I turn on the tap the water starts to leak between the hose & the connection is it possible to replace the water hose there is a rubber seal in the end of ...

Question about GWL11 Top Load Washer

1 Answer

...leaking; although not as much. Could it be the nozzle spray holding droplets of water?? At $70 an hour hate to call repair again. Hi just read your posting.1st try turning the hot water tap off and ...

Question about Fisher & Paykel Washer

1 Answer

I have a Fischer Paykel Smart Drive 5.5 which is leaking water into the machine when it is switched off. Obviously when I turn off the feeding taps the water stops dripping but how can I stop the ...

...leaking from hot hose value although hot tap not in on Hot Hose leak although washing in cold cycle, hot tap not on. I have changed the filters in both hoses, any ideas? Water will run out the hot ...

Question about Fisher & Paykel Washer

1 Answer

...it leaks all the time If the tap is leaking replace the washer in hose end. It's a common garden hose washer. If you mean there is water in the tub your inlet water valve needs likely needs

Question about GWL11 Top Load Washer

1 Answer

...behind the machine or at the tap.If the hose is leaking turn all taps off. the alloy crimp needs to be cut off & put a hose clamp on the hose.turn all taps off when machine has finished the

Question about GWL11 Top Load Washer

1 Answer

...behind the machine or at the tap.If the hose is leaking turn all taps off. the alloy crimp needs to be cut off & put a hose clamp on the hose.turn all taps off when machine has finished the

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Fisher and Paykel Washing Machine Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Fisher and Paykel Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...