Questions & Answers for: Nintendo laser cleaning

get a message that it is unable to read the disc. any suggestions hello you could try and clean the laser by hand take the top off the wii you'll see the laser unit take the top off the laser unit you

laser lens unit....with a cleaning disc....or try to adjust the laser focus in the mini pot fixed under the laser logical board... or try to buy on EBAY a new gamecube laser unit and change it... http

will not read the discs Open the wii and clean laser With Swab and alcohol. Push the laser reader the the other end ( away from spindle motor). This will recalibrate and clean. Special screwdriver is ...

...and turn your system off. i cleaned it and let it cool off for 5 hours, i dont know what else to try. anyone can help?? Either a dirty laser or bad laser. Trying cleaning laser. no lee los ...

...be read. Refer to operations manual for details. Try a different disk, Clean the disk, clean the laser with laser disk cleaner. If all fail, you will have to replace the laser or the drive

...laser/disc drive. Wii cleaning discs are available to help wipe the lens clean.(has to be made for the wii $10). Replacing the laser is not a job for the novice. There are U-Tube videos that go ...

... A cleaning disc has a little brush that would brush dust and debris away from the laser. A cleaning disc can be found here: ...

...laser cleaning disc made for Wii. If that doesn't do it then it's most likely a bad laser. Not an easy self fix for a newbie. ?warrenty? then send it in to Nintendo.(you can find out on their ...

...cleaner kit. 2 .If cleaning it did not work you may have to buy a new laser assemble or drive replacement and replace it. Make sure you look up your model number as to get the right laser

...fixed this exact problem on my Wii. I show how to troubleshoot, take it apart, clean the laser and replace the DVD ROM if needed. Cleaning the laser didn't fix my problem but most of the time it