Questions & Answers for: lancer alternator belt

Question about 2003 Lancer

1 Answer

...alternator on 2003 lancer es cannot find bolt to allow alternator to swing The bolt your looking for is there. There should be two of them one adjust the alternator and one that pivots at the bottom ...

Ad

...Have replaced alternator belt, air conditioner belt and power steering belt. My air conditioning in my 2003 lancer pushes the air solely through the defrost vents? why?????? change the vent

Ad

Lancer 2.0L and the alternator belt snapped. I have successfully removed the serpentine belt but im not sure how to loosen the tension on the alternator to install the new alternator belt. Please help

...Need to now what parts to order to fully service a 1.6 Lancer Estate Equippe automatic. Anyone know the list? fuel filter , spark plugs, air filter, timing belt, power steering-a/c-alternator ...

...lancer? The alternator is held in place by two bolts. Top and bottom bolts - 12 mill bolts. By loosening the bolts (especially the top bolt) you will find that the alternator can be manipulated ...

...lancer it makes a loud whining noise sounds like a bad starter drive Had this same problem, it was a loose alternator belt. If there is one thing I have learned in my experience, it is start with the ...

lancer es and need to change the alternator belt. I was wondering if anyone knows how or has a diagram? To move the alternator you have to loosen the bolt that holds the bottom of the alternator. Then

Question about 2002 Lancer

1 Answer

...in the middle of the tension pulley. 7 Start the Mitsubishi Lancer's engine to test the alternator belt and make sure it is working properly. Once you have verified it is working, turn the engine

...Lancer 2002 1.3Ltr Gasoline Engine - replaced timing belt - started engine without Alternator Belt & Power stering Belt just for testing - it run for few seconds & Cut off automatically then ...

Question about 2008 Lancer GTS CVT Sedan

2 Answers

...Lancer's engine to test the alternator belt and make sure it is working properly. Once you have verified it is working, turn the engine off. IF YOU HAVE AUTOMATIC BELT TENSIONER ITS BROKEN  ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...