Questions & Answers for: Mitsubishi lamp led

Question about WD-52525 52" Rear Projection HDTV

2 Answers

...lamp led indicator, bought the lamp and I am unable to locate the lamp inside the tv, took the lower back panel out and don't see anything that i can make out the lamp housing. is hard to replace the ...

Ad

Question about XL1XU Multimedia Projector

1 Answer

...lamp led goes green; then the power led goes red and the lamp led flashes green for a bit; and then the lamp led shuts off and the power led goes red--she has shut down. Nothing seems to break the ...

Ad

Lamp Led came on green and was flashing about once every second, after it flashed 3 or 4 times then it started flashing every 15 seconds 3 times then the Power led came on Red and the Lamp led started

Question about WD-62525 62" Rear Projection HDTV

4 Answers

...lamp LED is blinking yellow, that indicates that the lamp door or the air filter door are not closed properly. The power LED will blink green for about a minute when the TV is plugged back in ...

Question about WD-52725 52". Rear Projection HDTV

1 Answer

...lamp LED, self diagnosis error 34. Check for 5-volts DC at J-9 connector pin 1 and 2 on the Engine Driver PCB if missing replace the Power PCB part # 930B921002 3. LED stops blinking after 70 seconds ...

Question about WD-62526 Projection TV

1 Answer

...you have light in the back panel of your TV this LED indicator will remind you if the lamp must be replace because DLP projection has a lamp hour meter the lamp time for this DLP 6000 to 8000

Question about WD-62526 Projection TV

2 Answers

...LAMP" LED is solid RED: 1) Lamp Failure - Lamp failed to turn On. 2) Lamp is broken (e.g. burst or blown) 3) Lamp turns Off during P-ON There is no data relating to TIMER LED being solid RED. Hope ...

Question about XD490U Multimedia Projector

1 Answer

...status led turns green for a while, after some seconds lamp status starts blinking green, then turns off and power led turns red. solve the problem. Does the lamp ever come on if not then it is

Question about WD 65837 65 in. HDTV

1 Answer

...LED Indication Condition Red Lamp Failure Yellow TV Too Hot Slow Blink Red TV May Require Service Slow Blink Yellow Lamp Door Open or No Lamp Installed NORMAL INDICATIONS ABNORMAL INDICATIONS (For ...

LED Lamp LED Condition High Temperature - check ventilation air flow. (Temperature sensor is disconnected.) Off Off Blinking yellow Lamp cover is open. Lamp failure (Lamp fails to turn on) Off Off Red

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison and Video Experts

matt martin
matt martin

Level 3 Expert

1259 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...