...press CTRL+P or click on the printer icon down the bottom. This loads the Photo Printing Wizard that will guide you through what pics you want to print and allow you to change whether it is greyscale ...
...press the power switch on the printer, the lights continue to flash, and the printer does not turn off! 1) Turn off your printer, ensuring that the print head is at its home location and locked in ...
...label, and you return the old printer in the same box. In my experience, if you have tried the power cycle and cleaning the copper contacts on the print cartridges, I would call HP. The permanent ...
Question about DeskJet 5652 InkJet Printer
...press the "Arrow" Icon button until a sheet is fed into the printer. * * Note: When you are replacing the Ink cartridges and before you remove the tape from the bottom heads, give them a shake to ...
...printer EVERY TIME YOU PRINT AN ENVELOPE and make some kind of adjustment... which is, of course, impossible. THIS PRODUCT IS DEFECTIVE and the U.S. Attorney should investigate this fraud. Problem ...
Question about MFC-9840CDW Laser Printer
...printer, ten press On button to turn on. See your documentation." and the buttons flash. I did as advised with the same screen when it came back on. I also shut it off, unplugged it from the wall and ...
...printer alignment paper. Print out the alignment paper and put on the glass and press the scan button as indicated by the on screen prompt. You should receive a message stating " Printer alignment ...
...press the Power button ( ). Reinsert the cartridges, and then close any open doors on the product. If you receive a prompt to print a calibration page, do so. Reconnect the USB cable to the rear of ...
...printer, ten press On button to turn on. See your documentation." and the buttons flash. I did as advised with the same screen when it came back on. I also shut it off, and the ,no avail. It ...
Question about Photosmart C6180 All-In-One InkJet Printer
...press the Power button ( ).Reinsert the cartridges, and then close any open doors on the product.If you receive a prompt to print a calibration page, do so.Reconnect the USB cable to the rear of ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions