Questions & Answers for: Pontiac Grand Prix lab 100 manual

Question about 1999 Grand Prix

1 Answer

...manual and in order to shift you have to have enough pressure built up so it is going to be your vacum and if you bought your car used then it might have been repace and put some were else or your ...

Ad

what kind of oil goes into a supercharger on the 3.8L series 2 GM Supercharger oil, not 100 percent sure but i think this is best

Ad

Question about 2006 Grand Prix

2 Answers

...manual. It's quite a process on GM stuff. I think you have to put air in all the tires, then turn the key on and start letting the air out of the tires (one at a time) until you hear the horn chirp. ...

my computer is going bad how much is a new one Usually about $100. They are available at most part stores or on line parts stores. You can also save money by buying a used unit from a used parts ...

how much to fix an 2006 grand prix gxp mirror? 10 - 100 bucks call the local salvage yard they will likely have tyhe part cheep and some offer install service too or they can usually recomend a cheep ...

how many miles per gallon does my pontiac get? Fill the gas tank till the filler nozzle clicks Zero the trip meter Drive the car for say 100 miles Fill up the tank again until the nozzle goes click ...

...100% sure which ones they are and as well they all seem like the relay type which I don't know how to check anyways. Any help/links would be great. Thanks, Grand Prix Novice Fixer Go to Autozone.com ...

how do i change the heated oxygen sensor bank 1 for a 3.8L 2002 pontiac grand prix? Do i need to drive the car first to warm the engine up first? I'd instead go and get your favourite penetrating ...

Question about 2000 Grand Prix

1 Answer

faulty gas gauge Most of the time its is the sending unit in the fuel tank. The test for it is to use a variable resistor that is hooked up to the wiring at the fuel tank and watch the fuel gauge if ...

Question about 1997 Grand Prix

1 Answer

...with the module. The other component I would suspect is the crank sensor. This can be tested with a lab scope. You should have a five volt square wave from this sensor if it is working properly. ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...